Glacier Bay Modern Low Arch Faucet replacement braided supply lines

[tate16t]

Hello all,

I have a bathroom faucet similar to the one below. The faucet connector cable is screwed inside the bottom of the faucet, pretty far within the body. One of the connectors needs to be replaced. Is there a way to access the connector so that it can be unscrewed and replaced? Thanks

 

[Terry]

Do you have a brand and model number for that? Most of those will thread in and out by hand and seal with O-Rings. Do you already have the new connector?

 

[Sponsor]

 

[tate16t]

Do you have a brand and model number for that? Most of those will thread in and out by hand and seal with O-Rings. Do you already have the new connector?

I don’t recall the brand and model number. It was purchased a few years back. The connector does appear to thread out but the location of the connection is far into the body of the faucet making it impossible to do without a tool of sort or taking it apart. I will search a little more for the model.

 

[tate16t]

I got lucky and found it at HD. It’s the Glacier Bay model, HD67732W-6A01.

Here’s the link, https://www.homedepot.com/p/309670492

Thanks

 

[Terry]

I don't see that the supply lines can be replaced on the parts list.

https://images.homedepot-static.com/catalog/pdfImages/e6/e6515391-c05c-4d58-ae35-9be8ff6f8e27.pdf

 

[tate16t]

I don't see that the supply lines can be replaced on the parts list.

View attachment 67746

https://images.homedepot-static.com/catalog/pdfImages/e6/e6515391-c05c-4d58-ae35-9be8ff6f8e27.pdf

Thank you.