Bannerman
Well-Known Member
Chris, ensure the injector is fully cleaned and installed correctly. The injector is comprised of 2 pieces, one of which is threaded into the injector assembly.
If that doesn't correct the issue, rebuild the valve. The rebuild kit will include seals, spacers, O-rings, brine valve and piston. Here is a video detailing the full procedure including removal of both injector pieces.
You specified Fleck 5600 which implies a mechanical controller. The rebuild kit for a mechanical valve is not the same as for the Fleck 5600 SE or SXT digital softener valves so you need to ensure the correct kit is obtained.
If that doesn't correct the issue, rebuild the valve. The rebuild kit will include seals, spacers, O-rings, brine valve and piston. Here is a video detailing the full procedure including removal of both injector pieces.
You specified Fleck 5600 which implies a mechanical controller. The rebuild kit for a mechanical valve is not the same as for the Fleck 5600 SE or SXT digital softener valves so you need to ensure the correct kit is obtained.
What are the dimensions of the media tank?Drain flow is strong tho' on Back Wash etc 1.4 gallons per min.