tumbled
New Member
- Messages
- 4
- Reaction score
- 0
- Points
- 0
I replaced the cartridge assembly (TA10) and seats (TA4) on a leaking Symmons Temptrol shower faucet. Water (cold I believe) is leaking out of the center of the faucet control/spindle at a pretty good clip whether the faucet is turned on or off. I put a new cartridge (together with the new washer which came with it) and new hot and cold seats in but there is no change in the leak afterwards. Any ideas on what might be wrong? Is there anything I could have done wrong in installing the new cartridge & seats that would result in this? (I don't see any difference in the leak from before I replaced the parts and now). Thanks for any suggestions....