Remove the black flow control from the venturi if it has one. If the drip continues, buy a new gasket kit. It should come with the spider gasket, fig 8 o ring and drain seals.ok, in BR mode water is dripping out of the Venturi valve when I take off the Brine Line. Suggestions?
No. The flow plug I'm referring to is item #113. You can put the venturi in backwards but you can put the venturi gasket backwards. The hole on the gasket must match the hole in the venturi housing.Is the black flow control # 114 on the diagram here ? http://products.geappliances.com/Ma...Dispatcher?RequestType=PDF&Name=003674144.PDF
No. The water level should be about an inch from the bottom.Also, again my water level hasn't fluctuated a bit through two recycles and the tank is about 1/2 full. Normal?
Once you get the unit to draw, it will pull out the excess water.So should I eliminate the water that is in there or will it do it on it's own?
With the right guidance you can do it.Is this something that a service technician will have to do or is it something mr. avg joe(me) can do?
Item # 130 but you can get it cheaper at http://www.softnerparts.com/c=V50V8...orthStar-712971670921637134224WS35X10005.htmlso are you my guidance counselor? which parts are we talking about here? http://www.partselect.com/ModelFram...ed=00010668i02&Position=2&mfg=GE&Type=&Mark=2
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.