samlin7
New Member
- Messages
- 43
- Reaction score
- 0
- Points
- 0
Hi
This may sound stupid, but i am fairly new at this plumbing thing,
I soldered a brass fitting to a m-rated copper pipe, Now I hear that I should use a L-rated copper pipe. Luckily it is a short piece and easy to undo and put in the L-pipe.
My question is can I reuse the brass fitting (a 1/2" sweat joint on one end and a 1/2" threaded female end on the other) once I unsolder it?
Thanks
sam
This may sound stupid, but i am fairly new at this plumbing thing,
I soldered a brass fitting to a m-rated copper pipe, Now I hear that I should use a L-rated copper pipe. Luckily it is a short piece and easy to undo and put in the L-pipe.
My question is can I reuse the brass fitting (a 1/2" sweat joint on one end and a 1/2" threaded female end on the other) once I unsolder it?
Thanks
sam