About a year ago I replaced a 4" centerset with a new 4" centerset (cartridge design) on the bathroom sink and has been troublefree until now.
Now, when I turn on the cold water more than 1/3 open, I get a rapidfire hammering noise which stops if I reduce the flowrate. This problem doesn't exist with the hot water. Is this an early warning of the cartridge failing?
Now, when I turn on the cold water more than 1/3 open, I get a rapidfire hammering noise which stops if I reduce the flowrate. This problem doesn't exist with the hot water. Is this an early warning of the cartridge failing?