Navien 240a2 - cant set time and date

Users who are viewing this thread

Baltik

New Member
Messages
20
Reaction score
1
Points
3
Location
SF
Seemingly stupid problem but quite frustrating if i want to set a recirculating schedule. When i set time and date in settings - then return to it it's always back to initial 2000-00-00. I did a factory reset and went through initial setup again but no avail, time and date wont stick. Anyone experience this?
 

breplum

Licensed plumbing contractor
Messages
1,074
Reaction score
402
Points
83
Location
San Francisco Bay Area
Seemingly stupid problem but quite frustrating if i want to set a recirculating schedule. When i set time and date in settings - then return to it it's always back to initial 2000-00-00. I did a factory reset and went through initial setup again but no avail, time and date wont stick. Anyone experience this?
Talk to Navien, it should work. Unit should be under warranty, so if it is defective, look up NSS for factory covered service.
I've seen a few and heard about "bad motherboard so, replace" as solution to a few problems. Unfortunately, Navien only reimburses $75 for the swap out so I am not signed up to be a Navien Service Specialist but those people must go out if less than one year old.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks