dogeatdog
New Member
Hello again. For whatever reason, my post got removed from the system. Well, I will try to repeat what I had said earlier:
Current settings (2 in the house, city water, and hardness is at 16-18 per city):
DF Gal ; Units
VT dF1b ; Downflw/Upflw, Single Backwash
CT Fd ; Meter Delayed regen trigger
NT 1 ; Number of tanks
C 32
H 20 ; Hardness-- compensate if needed
RS RC
RC 200 ; Reserve Capacity Gallons
DO 14
RT 2:00 ; Regen time (default 2 AM)
BW 10 ; Backwash (minutes)
Bd 60 ; Brine draw minutes
RR 10 ; Rapid Rinse minutes
BF 6 ; Brine fill minutes
FM t0.7 ; flow meter
Even after using separate regen with 8 oz resin cleaner, there is no change in the hardness.
Thank you, Dave
Current settings (2 in the house, city water, and hardness is at 16-18 per city):
DF Gal ; Units
VT dF1b ; Downflw/Upflw, Single Backwash
CT Fd ; Meter Delayed regen trigger
NT 1 ; Number of tanks
C 32
H 20 ; Hardness-- compensate if needed
RS RC
RC 200 ; Reserve Capacity Gallons
DO 14
RT 2:00 ; Regen time (default 2 AM)
BW 10 ; Backwash (minutes)
Bd 60 ; Brine draw minutes
RR 10 ; Rapid Rinse minutes
BF 6 ; Brine fill minutes
FM t0.7 ; flow meter
Even after using separate regen with 8 oz resin cleaner, there is no change in the hardness.
Thank you, Dave
