Double sink rough in, drain/vent on left

Users who are viewing this thread

Motoblade162

New Member
Messages
2
Reaction score
0
Points
1
Location
Maryland
We’re remodeling our master bathroom and have relocated the double sink vanity. The drain/vent stack is now offset to the left rather than being centered.

I want to make sure the new layout will drain properly and avoid any trap siphoning or dry traps. All piping will be 2". There is also an existing single sink on the other side of the wall that is tied into the same 2" drain/vent.

Could you take a look at the attached sketch and let me know if this setup is correct?
Also, how high above the sinks should the vent line be run?

Thanks for your time and guidance!

Drawing.jpg
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks