javelindesign
New Member
Hi all, I'm putting in a new master bathroom and am planning on a steam shower, because of this, and my desire to combine and keep control as simple as possible, I'm thinking about a Kohler Digital Anthem system. I know there are pros and cons to such a system, but my question for you all is this.. The valve I'm thinking of has hot/cold in and then three ports out (that I'm going to use for standard head, rain head and hand shower). The valve -
K-28210-NA
has 1/2" INLETS and 1/2" port OUTLETS. The bathroom is on the 2nd floor of an old house... 80psi in the basement. I'm planning on feeding this valve with 3/4" PEX right up to the inlets.. Even with the reduction to 1/2" will this be ample flow for all 3 outputs at once? Seems to be Kohler should have made the inlets 3/4" (as they are with valves that have 4+ outlets in their line).
Any thoughts would be appreciated. Thank you!
K-28210-NA
has 1/2" INLETS and 1/2" port OUTLETS. The bathroom is on the 2nd floor of an old house... 80psi in the basement. I'm planning on feeding this valve with 3/4" PEX right up to the inlets.. Even with the reduction to 1/2" will this be ample flow for all 3 outputs at once? Seems to be Kohler should have made the inlets 3/4" (as they are with valves that have 4+ outlets in their line).
Any thoughts would be appreciated. Thank you!
