Leadbenny
New Member
I'm installing a hardwired towel warmer and I thought I would include an outlet on the same cable because the towel warmer needs a junction box anyway. Can I run a 12/3 with both black/red hot, black attached to the switch, to the outlet connected to red, and continue the black to the towel warmer with all neutrals and grounds connected? It's 20 amp protected by a GFCI outlet upstream. See diagram for clarity:
EDIT: the circuit is connected to a GFCI outlet upstream of the switch
EDIT: the circuit is connected to a GFCI outlet upstream of the switch
Last edited: