transfer valve

  1. Lordoftheflies

    Best way to plumb 2-way diverter and mixing valve for shower/tub?

    Hi. Wondering if you all could offer suggestions as to how to plumb my shower/tub combo. I have the Kohler 2971-k-na 3/4" inlet and outlet mixing valve. I'll be bringing up 1" PEX to the 2nd floor the entire way from the 3/4" copper main. This unit does not have a built in diverter and has...
  2. Happee

    New Gas Water Heater Temp +30 degrees Possibly Caused by Crossed Plumbing Lines?

    Hi, everyone. This is my first post, so please forgive me if I'm not providing enough information, too much info, or not explaining things clearly. I can unclog drains and turn water lines on and off...that is where my plumbing experience ends. :) We live in the Twin Cities (MN) and our home...
    • Happee
    • Thread
    • a.o. smith cross connection moen problems regulator scalding temperature fluctuations transfer valve water heater
    • Replies: 3
    • Forum: Water Heater Forum, Tanks
  3. hacheson

    Shower Tower Panel: Does Height Matter? + Valve Already Installed

    We are debating swapping out our yet-to-be-installed shower tower panel for another unit comparable in panel (body/base) width but not in height, the new panel is shorter by 16.5". Additionally, the transfer valve from the first shower unit has already been plumbed into the wall. Do either of...
Back
Top