stop valve

  1. Iitalnsd

    How to unstick the stop valves of a Moen shower?

    Hello, I need to substitute the cartridge of my old Moen pull-out shower handle that has become so hard to push back in that in the last attempt I broke the faceplate. The problem is that I live in a condo and I can't switch off the water to my apartment without affecting the whole column (which...
  2. FredGarvin

    Can I 1/4 turn stop valve in supply line for cheap bidet that leaks?

    I bought a cheap bidet. I need to child-proof it, and it drips. I want to address both with an in-line 1/4 turn shut off valve. The bidet came with a valve that split the cold water above the shut-off. It's a replacement toilet so the connection above the shut-off wasn't a compression one...
  3. Flapper

    I successfully replaced a stop valve!

    After seeing Terry's advice to always replace corrugated supply lines, and the info about sleeve pullers, I thought I'd replace the one on the downstairs toilet where I replaced the fill valve but not the supply line. It wasn't leaking and it worked fine so I took a good look at it. I discovered...
Top