sdr

  1. Robert Leise

    PVC, What type of fittings/solvent do I need to use

    I am a third year plumbing apprentice swapping out a vacuum breaker for a side job. I do commercial work and am not familiar with the irrigation supply line. 1” IPS PVC1120 SDR 21. (Photo below) I need to offset over bc the vacuum breaker outlet is on the opposite side of the old one. Not sure...
  2. Madscientistii

    HDPE (black poly) drop pipe Question

    Is it OK to use 1 inch SD1R 160 PSI rated black poly for a drop in well or should you use a thick wall pipe like a SDR-7 160 PSI rated pipe? the first one is whats most commonly available around me for water systems. thanks!
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks