pvc drainage pipe

  1. dh37

    PVC: How attach Schedule 40 4" to Type-C tele-duct?

    I need to extend some 4" PVC drainage pipe. The problem I'm having is that the existing pipe is "Type C" ("tele-duct"). It has a slightly different outer diameter (4.350") than a typical PVC pipe (e.g. Schedule 40, 4.50"). I've only been able to find one possible "Type C to Schedule 40" adapter...
  2. khaldrogo

    Sewer Line Sleeve Leak HELP!!!

    Hi guys I'm new to this forum and site and can see that this is a wealth of information. I currently have a issue with a leak in my basement wall only when it rains. More specifically with a leak that is coming underneath (to the best of my guess) the sleeve of my sewer pipe that exits the...
  3. CalebRobertsonUSA

    HOW TO FIX??

    Hey guys and girls, I’m new to plumbing and I have a bathroom I am remodeling. I have a basic understanding/knowledge about plumbing, but far from an expert. How would you fix this dated plumbing mess? If you could attach links to parts that would be appreciated. Thanks in advance. Trying to...
  4. Dr Dee

    Plugging a 1/4 inch hole in PVC drain pipe under the sink.

    So, I installed a RO drinking water system yesterday under my sink. I did drill a 1/4” each hole in the drain pipe, and used a saddle to connect the RO drain rubbing. This all works fine. But I realized I connected the saddle AFTER the p-trap, where it should probably be before. So now I’m...
  5. Primemover

    Galvanized to PVC Question

    In my situation there is not enough room between the galvanized fittings to cut and have a stub big enough to use a no-hub adapter. I am working with a 1-1/2" waste line. I am wondering if I can connect one side of a No-hub adapter over the female portion of a galvanized fittings (maybe use a 2"...
  6. willard f

    Lennox Furnace Condensate Trap Leak - Need help

    Hello, I have a Lennox G51MP Furnace. I recently noticed the condensate trap is leaking. I am pretty sure it is Lennox drain trap Cat # : 61M35 | Model/Part #: LB-96382A. The leak (just a slight but constant drip) is located where the pvc meets the trap's drain stub (at least that what I think...
  7. Ash75

    Belly in the PVC sewage pipe

    Five months ago we purchased a 10 years old house. Recently we had a sewage backup in the toilet, flooding the bathroom and the water came in the bedroom. My plumber cleaned the sewage line with a very long snake. He ran a camera and said I have a belly under the house in the PVC pipe. He did...
  8. andres

    Offset Closet Flange, 45d flange issue.

    Guys, I'm in desperate need of some help guys. My new floor will be installed soon. This is what i'm dealing with. PVC flange with metal ring. PVC part of flange is very tight on the main pipe, i was thinking to use a 2 piece replacement metal flange then on top spacer to level with new...
  9. tpcolson

    Can PVC be encased horizontally in concrete

    Have an unfortunate "this is the only way this is going to work" situation with a DMV repair, resulting in the repair portion of the drain pipe, having to run 4 feet horizontally (yes, at the correct slope of 1/4"/ft) before turning up into the main vent stack...mostly above the gravel sub-grade...
  10. Bill white

    Use of Pvc Drainage Pipe

    Pvc Drainage Pipe Feature: 1. PVC-U is made of hard plastic material with no plasticizer added. It has good performance in surface feeling and tensile strength, aslo it owns high pressure-resistance grade and pipe safety index. 2. The material of PVC-U has good resistance to aging which help...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks