problems

My house runs on well water and water from a cistern also. Today the cistern ran dry causing the need for me to prime the well pump after filling my cistern. I primed the pump, all seemed well, came on at 20 shut off around 45, held pressure,no leaks to be seen. Everything ran well with it all...

Hi there I would first like to say thank you for taking the time out of your day to read and hopefully help me out, I have been reading ALOT of posts about New wells and dirty water, & to run and KEEP running the water for weeks, etc.. etc... to get the well developed/ clean water, But my...

We took a very small 1949 bathroom, gutted it and added three feet to it. We hired professionals for plumbing but it was a bumpy road with them. We go to use the tub for the first time and it wouldn’t drain. There was a MINUTE amount of water draining but my husband had to take a shop vac to the...

Hi, everyone. This is my first post, so please forgive me if I'm not providing enough information, too much info, or not explaining things clearly. I can unclog drains and turn water lines on and off...that is where my plumbing experience ends. :) We live in the Twin Cities (MN) and our home...

Hi there, I'm new to this thread and a first time home buyer. We're redoing our bathroom and found that our rough-in will be about 11.0" - 11.25" from our finished wall (we'll have tile on the wall). Our contractor is telling us that we'd need to find a 10" toilet or a 12" toilet that will fit...

Hi All, I recently purchased and installed a 32K 10% crosslink resin water softener with a Fleck 2510 SXT valve. My calculations led me to the 32K capacity: 9 grains hardness, 3 people, 2 bathrooms, and about 2,500 gallons per month usage. The install was simple and I immediately had soft...