poly pipe

  1. sklett

    304 stainless fittings mixed with galvanized fittings - OK, or not smart?

    Hello, first post and I decided to ask my question here because I'm going in circles and driving myself absolutely crazy. My situation: Running a 700' long, 1-1/4" 200 PSI (SIDR9) polyflex (ADS) line from shop to my house. Along the way I want to install a non-freeze yard hydrant. I planned to...
  2. Jack-of-All-Trades

    Best way to fix leaking fitting in black poly pipe ???

    I have 3/4 poly pipe coming from my well. Artisian well needed more pressure, particularly during summer droughts. Bought a jet pump and tried installing. The pipe comes up vertically from the ground so I need a 3/4 90 degree angled fitting to line intake up with the pump. Had to use brass...
  3. Madscientistii

    HDPE (black poly) drop pipe Question

    Is it OK to use 1 inch SD1R 160 PSI rated black poly for a drop in well or should you use a thick wall pipe like a SDR-7 160 PSI rated pipe? the first one is whats most commonly available around me for water systems. thanks!
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks