high iron

  1. J

    High iron (12ppm) and high Manganese (.44ppm)and slightly acidic water (6.5)

    I have a ph of 6.5, iron is at 12ppm, manganese is .44 ppm, hardness is 3 grains, and TDS is 90. I’m trying to figure out which media is the best in my scenario i know birm won’t work because of ph. All the solid magnanese oxides require a higher ph to perform at their full potential. Greensand...
  2. Garydh

    Help with water treatment

    Hi I spent some time on this forum last winter and decided to put in a sandpoint this summer. I put it down about 13 feet and have lots of water. I am about 50 feet from the lake on a small property. Moving the point is not an option as the septic field will be closer than 50 feet. Gotta say I...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks