gerber maxwell

  1. G

    Replacing Case 3000 - Set Very Low - Recommendations?

    Hello, First off, Terry, THANK YOU so much. I'm a new homeowner and our Case 3000 developed a nasty crack in the tank, so we have to replace it. This forum has been a wealth of extremely helpful information. Now, to the questions. 1. It looks like our Case 3000 was hung low, with the bottom...
  2. Deck House NIC

    Gerber Maxwell wall hung gasket

    I am replacing our old American Standards with Gerber Maxwell wall hung toilet. Took the old toilet off and did some wall repair and painting. Got a neoprene gasket from Zurn and went to install the toilet and the gasket seems to be too thick. The toilet ends up about 1/4-1/2 inch off wall and...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks