Search results

I will have one soon and test it the next time it does it. This pump has is wired for the 115 option.

Yes I wired around it and am using the switch at the CSV. The pressure switch is still attached to pump (the one that comes with it) but not wired at all. I will admit my wiring job is not the best and there is a couple splices between pump and pressure switch. I threw everything together to see...

The air tank pressure is at 48 which is 2 below cut in. Would that explain my issue? I guess the thing that gets me is it has worked perfectly fine for 2.5 weeks without any hiccup and now the past 2 days it has done it once a day. It’s just weird to me. Also, about the switch contacts. Tonight...

It is a Square D pressure switch that comes with CSV.

I installed a new Goulds J15S (1.5hp) pump with CSV about 2.5 weeks ago. It has worked great up until 2 days ago. Somebody told me there was no water at the house. I went into the basement and found that the pressure gauge was ”zero”. The breaker was not tripped. I at first thought my water...

Oh ok. With the submersible pump and csv system what should the pressure tank be set at?

I was thinking it would be nice to use the smaller tank but came across your post in this thread and it made me wonder. “I would also use a 10 gallon size tank with the PK1A kit, because with a two story house I recommend 50/70 pressure switch setting which needs a slightly larger pressure...

I currently have a shallow well jet pump and I am wanting to switch to a submersible pump. I don’t have a well but since I live on a hill we have a 600 gallon water storage tank. We get enough pressure from the water company to fill this tank which is buried in the ground with a float valve...