Search results

  1. M

    HELP WITH CLACK WS1TT INSTALATION

    hi; I recently install a WS1TT in softener mode, I used a 1465 tank with 75L resin and gravel at the bottom. And fails to regenerate. More on the issue later, first I will copy the settings: I installed the plugs for the second tank, So no twin tank. The service menus are: Next+Down...
  2. M

    Clack WS1 not pulling brine

    I changed the violet injector to the DN position and plugged the up: the rinse doesnt work the backwash yes the brine dn: finally sucks backwash: yes rinse: nothing fill: nothing also need help please.
  3. M

    Clack WS1 not pulling brine

    hello I have the same problem I have a Violet injector in the UP position and in the Down an injector plug, should I remove it?
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks