Search results

  1. Loueber

    Main shut off before meter bleed hole?

    Hope everyone is well . I am replacing my whole house inline water filter. I want to also replace some original 1956 copper line from the meter to the filter. It requires me to shut off the main valve.. However when I get about half way through the shut off, water shoots out through a small ...
  2. Loueber

    Connect two PVC vents to vent stack

    Hi all. Fast question. Massachusetts. I need to connect 2 two inch PVC vents to this 4 inch cast iron vent stack. I don't want to drill a hole in the roof for a separate 2 inch stack, the roof is too steep to get in top. Tieing I to this is the only possibility. Can I use a fernco 4x4x2 y...
  3. Loueber

    Sink venting diagram ok?

    MA is a communist nightmare lol
  4. Loueber

    Sink venting diagram ok?

    That's a good idea I will ask them if they will allow a studor vent. I'm not looking forward to the work, but the sale of the property hinges on fixing the vents.
  5. Loueber

    Sink venting diagram ok?

    Unfortunately they don't allow them in MA. Everything has to be difficult here...you know...it's MA. Lol
  6. Loueber

    Sink venting diagram ok?

    Thank you. Trying to fix venting issues in an old house where there really is no room to work, is not easy. I should be able to join all 3 vents behind the fridge, then punch out through the wall and send the pipe outside up past the roof. It will be next to a roof skylight that opens, so im...
  7. Loueber

    Sink venting diagram ok?

    excellent. Thank you. This answered my question perfectly and now i have a plan to move forward.
  8. Loueber

    Sink venting diagram ok?

    I see, how about this adjusted diagram? You said that where the vents join has to be above the top sink by 6 inches ( my basement sink and washer will connect above the upstairs sink by 6 inches) 1- You mention no horizontal lines, but angled up through the interior wall is ok before it exits...
  9. Loueber

    Sink venting diagram ok?

    Hi everyone, In Cambridge MA here. I need to vent my basement sink, and my first floor sink to bring it up to code for a sale. is the diagram i attached ok to do? the red dotted lines are the proposed plan. my 2 important questions are, the loop down into the basement where it connects to the...
  10. Loueber

    help with identifying brass union (and location for purchase)

    Thanks Wayne, with your help i was able to track down exactly what i needed!
  11. Loueber

    See you later, not goodbye!

    So sorry for your loss to his remaining loved ones. I pray that you will all find peace and comfort knowing you will see him again one day. May God bless you with peace.
  12. Loueber

    help with identifying brass union (and location for purchase)

    i am spending way too much time looking for the union fitting i need. can someone link to the proper worded item either at supplyhouse. or HD or your favorite site? i really only need the male portion, but wouldnt mind replacing the whole 3 pieces if needed especially since i want to...
  13. Loueber

    loop a base-ray cast iron baseboard with itself?

    Ok thanks. That's kind of what I was expecting. I think your idea of a corner piece might work. But instead I can send it one foot into the cabinet and through to the other side where I have room to send it down through the floor. I can build something up around the one foot section. Thanks...
  14. Loueber

    loop a base-ray cast iron baseboard with itself?

    It was hard to describe without pics. That would work with coper slant fin type baseboards. Mine are the heavy cast iron ones.
  15. Loueber

    loop a base-ray cast iron baseboard with itself?

    Hi fast question. I am reinstalling a 8 foot long (5 sections) - 7 inch tall base ray cast iron baseboard after a kitchen renovation. (non steam) Problem: drilling into the floor for the water exit pipe on the left side will be almost impossible, due to floor joists, and rim joists. Although i...
  16. Loueber

    Cast iron sectional baseboards separated

    Agreed, i will not take the chance to reuse it.
  17. Loueber

    Cast iron sectional baseboards separated

    Of the 4 total baseboards i removed, this was the only one that separated. It makes sense to not even try to reassemble. putting my finger in there, i can feel the rust deformed the female side.
  18. Loueber

    Cast iron sectional baseboards separated

    Hi everyone. Fast question on old cast iron BaseRay baseboards from 1957. During my remodeling, i removed 8 foot sections of 12 inch tall cast iron baseboards to be stripped and repainted. It seems they were put together in 2 foot sections. The sections attached to each other with what seems...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks