Search results

  1. Strider518

    New 2 gallon expansion tank factory set to 40psi and circulation pump

    Very well. Thanks to all for your input. It is appreciated. Let's wrap this up. Good bye.
  2. Strider518

    New 2 gallon expansion tank factory set to 40psi and circulation pump

    Thanks to all again for the advice. Forums like this are (at least) worth the cost of a plumber's service call. I remember a cartoon from about 30 years back where there was a picture of two men: One was obviously a Plumber, and the other one was a Banker, with the background implying there were...
  3. Strider518

    New 2 gallon expansion tank factory set to 40psi and circulation pump

    Hello to all, and thank you for your advice. So, here's what I did, (with pressure at a cold water hose bib at 65 psi): 1.Hot water tank up to temperature. 2. Circulating pump running. 3.I opened one hot water tap at the kitchen sink. 4.I pressurized the expansion tank to 65.
  4. Strider518

    New 2 gallon expansion tank factory set to 40psi and circulation pump

    Thank you Jeff for your post. In the meantime, I did an actual test at a garden hose faucet: 65 psi. Does this change your recommendation?
  5. Strider518

    New 2 gallon expansion tank factory set to 40psi and circulation pump

    I just finished installing a new expansion tank (factory set at 40 psi) for my natural gas water heater. I use a Grundfos type UP 15-10 B5 circulation pump. Other markings on the pump label are: P/N 59896213 P1 and what looks like a mathematical formula: I 1/1(A) with the number .22 below it...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks