Search results

Hi everyone, after resetting the system a few times it ran fine all winter last year. I am still planning to adapt the plumbing and have the hydraulic separator, I just haven't had a chance to get to it. I'm remodeling my house and the wife doesn't like to see me work on the shop when we have...

@Dana very insightful comment again, thank you. I paid only $380 CAD for the boiler, I wasn't looking for something this big, I just assumed it would heat everything quickly. I looked at mini-splits but I'm not sure it works well in our cold Canadian weather. As far as I know they don't work...

@fitter30 Hi, my pump is a UPS15-58FC, 3 loops, 1/2 pex, roughly 300ft per loop. Any settings I can change?

@Dana thanks for this really informative post. The shop is 28x22, the floor is 567 sqft. The pipe isn't in the slab, I just put vapor barrier, laid 2x4 sleepers 24 o.c. and 1/2 rigid insulation and added 3/4 osb on top. Each 24 in cavity has 3 runs of pipe. The walls and roof are insulated to...

@fitter30 it just says "outlet ARHL", there's another fault for "outlet MRHL"

Hello! New member here but I've been reading the forum for some time now. I've recently installed a KBN211 in my detached workshop. The boiler wasn't a choice, I just happened to get it at a really good price used. My system is just in-floor heating with 3 circuits totaling about 1000 ft of 1/2...