Search results

  1. not_plumber

    Third hot water compression fitting's center keeps cracking

    The pipe was swollen. I cut it out using a cutter tool. Put a sharkbite 1/2 pushon that is connecting copper pipe at one end where it was not swollen to 1/2 pex tube that is 20 feet to where I made the next copper pipe cut where it was not swollen. Except that this cut did not make as clean of a...
  2. not_plumber

    Black particles in faucet aerator

    I get these black particles fragments because I have old copper pipes that have gotten this fragmentation happening inside them. When I stick my finger inside my old copper pipe ends and twist around I pull my finger out with these hard black fragments. Do you have old copper pipes anywhere it...
  3. not_plumber

    Third hot water compression fitting's center keeps cracking

    There's a 30 foot run of 1/2" copper hot water pipe that was cut where a compression fitting was installed. I replaced this hot water fitting 3 times with a new one of the same type that was on there that had gotten old and rubber seals dryrotted away which means it was leaking badly. The new...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks