Search results

Thanks, everyone. I was being lazy and simply looking for a pro to recommend a good toilet that they knew had a some play. I've ordered a Toto from HD and based on the spec sheet it should fit no problem. If not, at least returning it is fairly easy. WJC - My understanding has always been...

I've been looking at those. Most seem to be 1 3/8" gap. Probably going to get that Entrada actually. Thanks!

That's what I need to know.

Bro, thank you SO much for the advice on the heated floors. I've done lots of bathrooms, but they were all in Los Angeles, and never with heated floors. No bee's wax!!!!

So you're saying that you typically see a gap between 1/2" and 7/8" of an inch between back of bowl to wall on most toilets? That's good news.

I almost mentioned something about that. The floor is self leveling concrete. On top of that will go thinset, then Ditra Heat Duo, then thinset and tile, so the closet flange hasn't been officially placed yet. The flange will sit flush on the top of the finished tile.

I am building a bathroom in my basement, and for whatever reason (me!) the actual rough in on the toilet flange is 11 and 3/8" from drywall to center of toilet flange. My hunch is any 10" rough in toilet is going to create a large gap between back of bowl and wall. Do all 12" rough in toilets...