Search results

Sorry about the delay in responding. There are no threads on the outside edge of the flange. The OD is 1.66". The flange appears to be screwed on to the waste pipe. See the attached two new photos. I don't want to unscrew this flange as it may damage the actual flange or the pipe in which it...

I appreciate your reply. Thanks.

Hi Everyone, On July 4, I changed our kitchen sink with a Kohler Pro-Function single-basin, replacing an older double basin. I was able to complete the task from cutting corners and sides of the granite countertop to replacing the faucet. When I looked at the p trap attached to the waste...

Good info. The shower does get momentarily hotter when someone flushes the toilet or if the dishwasher is running. I'll start planning for a single-handle shower upgrade in the near future. Thanks again.

Michael, thanks for the tip on the Moen single-handle shower faucet and its cheaper springs and seals. I understand that both you and Terry recommend replacing the two handle shower faucet with a single one. If the current two handle breaks, I'll certainly make the update. We've not had an...

Jim, I appreciate your detailed explanation. I was wondering why my plumber soldered the threaded connections but I guess the teflon tape would disintegrate with the heat. It's been over a week and there are no leaks so I can close up the drywall for now. It's great to learn the ins and outs of...

Hi Jim, Terry and those who "Love" this cool forum, Happy Presidents' Day! Based on your advice, I contacted a friend who referred a plumber to me. The plumber also happened to be a friend that I've known for the past two decades. He removed the old solder from the two threaded adapters...

Hi Jim and Terry: Your quick, detailed replies are much appreciated. I've become coming to this forum for years to learn about these plumbing projects. The tips you and the team provide are invaluable. Didn't know about 50/50 solder til you brought it up. I'll be contacting a plumber for this...

I recently installed a new tub spout to my two-handle Price Pfister shower valve. I removed the old tub spout with galvanized pipe nipple and replaced it with a new 3" long by 3/4" brass nipple. It took quite an amount of counterclockwise force with a pipe wrench to remove the old tub spout. It...