Search results

  1. Daluu

    Is this Water Hammer?

    Is the old PRV located before or after the main supply line shut off valve or how close is it to the shut off valve? That might be one reasoning how they chose to go about it. I had a plumber that instead of replacing the main shut off valve (a gate valve) that was worn, and that valve was also...
  2. Daluu

    How to remove grouted in shower drain cover

    I wonder how it went for the OP
  3. Daluu

    Can't remove Delta "bonnet" to replace cartridge!

    What do you mean body twists? A part of the valve cracks or breaks off? Or the valve connections to the plumbing pipes leak or break?
  4. Daluu

    Can't remove Delta "bonnet" to replace cartridge!

    is that likely going to eject/shoot the cartridge out of the valve? and water spattering out
  5. Daluu

    Should back wall have the plaster ground hole cut or fine as it is now?

    See photos, the contractors made openings for the screws that the trim will mount through I believe. But they didn't punch out the bigger hole of the plaster ground. But of course a solid surface (HI-MACS, like corian, 1/2" thick) will go over this as the finished wall. That one I figure should...
  6. Daluu

    Question about tub stringers

    Did you get any feedback/response on this?
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks