Search results

  1. A Bavier

    Bath Tub Trap sucked dry from washing machine. Fix? Pics included.

    Thanks for the concern. They are at the top of the picture in reply three, but it isn't the most clear. There is one from the tub going up from the San T, and a 2nd vent that is a collection of all the items from the first floor. They'll be joined and routed over the 2nd floor sink, like was...
  2. A Bavier

    Bath Tub Trap sucked dry from washing machine. Fix? Pics included.

    Ok, going through that checklist you wrote, it looks like I'd be good with that setup I drew up. Everything will have a dry vent. I do plan on using a donut on that cast iron pipe and running the 2" PVC into. Now to go get the parts!
  3. A Bavier

    Bath Tub Trap sucked dry from washing machine. Fix? Pics included.

    I appreciate the recommendation. Does this picture sum up the recommendation regarding the wye and the vent? Wye lowest, then the laundry drains in above, and that is vented to the lower vent pipes. The 2nd floor tub drains into the wye's branch, and that vent line separately goes up to the...
  4. A Bavier

    Bath Tub Trap sucked dry from washing machine. Fix? Pics included.

    I live in WI, in a very small town. Thanks for any wisdom you could pass to me. I'm fairly handy, but this is the deepest plumbing project I've every considered doing. I would like to fix the multitude of problems with this 1.5" PVC pipe that is highlighted in the following picture in orange...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks