Search results

  1. My city water

    Just moved update water softener settings

    Hello all We recently moved and I wanted to confirm my softener settings. We have 4 adults in the house and averaged 800-1000 gal of water a month. The city water hardness here is between 18-21. I tested it this morning with my hatch kit and it was 21 (Thank you central Texas) Here’s the...
  2. My city water

    Replacing 3 tanks to tankless

    I should change my user name. we moved and are now on city water
  3. My city water

    Replacing 3 tanks to tankless

    I was going to just leave the extra chimney as is almost like a vent. I figured I can sell the 3 water heaters And I don't care for hot water tanks in the attic.
  4. My city water

    Replacing 3 tanks to tankless

    We are moving into a new home in Houston TX that was just built. Water avg is 70 at the tap. The builder put three 40 gal short water heaters in the attic. 2 are in series. I have a one inch gas line that splits to the 3 Heaters. Before we move in I am going to replace them with one Tankless...
  5. My city water

    Now on city water need advice

    Thanks. I had figured as much but I love gadgets. Anyway here is what I'm thinking. FLECK 5600SXT 32k, 9x48 Fiberglass Resin Tank, 1 Cu Ft 10% Cross Link, Gravel Under-bedding, 15x36 Brine Tank Fleck 5600STX 9x48 Fiberglass Carbon Tank, 1 Cu Ft High Activity Carbon, Gravel Under bedding With...
  6. My city water

    Now on city water need advice

    I found this wifi enabled whirlpool water softner. It's a 46k unit comes with a 2 year warranty, 3 years on electronics and 10 on the tank. I can get 10% off and remote monitoring sounds like a bonus. Besides the unknown resin does anyone have an opinion...
  7. My city water

    Now on city water need advice

    I've used a pool test kit and at the tap it's been about 2 for the past month.
  8. My city water

    Now on city water need advice

    I'm actually outside of the city in a mud district. They still use chlorine and I haven't heard of plans to change. http://www.municipalops.com/districts/2016ccr/0112016ccr.pdf
  9. My city water

    Now on city water need advice

    I recently moved to Houston TX and no longer am dealing with a well and lots of iron. Now the water is 7 grains of hardness and between 2-3 ppm of chlorine. From what I've read so far I should start with a carbon setup and then softner. The house has 4 full baths but only a family of 4 so...
  10. My city water

    New 9100sxt 48k softener my settings

    Thank you for looking. We are on a septic system so it doesn't hit the town. However if I can reduce then iron prior that would be good. What type of iron removal system to you recommend?
  11. My city water

    New 9100sxt 48k softener my settings

    Just moved to a new house a few months ago and the old softener was useless. I have 16 total grains of hardness, 8 for the water (prior water test and hatch kit) I also have 2 ppm iron, .02 of manganese. I purchased a 9100sxt twin tank softer. Each tank has 1.5 cruft of SST-60 resin. 48k total...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks