Search results

  1. Bcorner

    3 of 5 Zones won't activate on timer

    My Multimeter was defective, I purchased a new one and the system voltage is now 28v. I disconnected all wires and checked Ohms, the bad zones 1,2,5 have no reading just says OL on meter, the 2 working zones 4&5 have a 44 Ohm reading. When I connect one defective zone to the panel and activate...
  2. Bcorner

    3 of 5 Zones won't activate on timer

    Which wire are you referring to? The disconnected one that I wrongly circled I just remembered him telling me was a spare for future use.
  3. Bcorner

    3 of 5 Zones won't activate on timer

    I have 5 Zones on a Rainbird ESP-TM2 6- zone controller, professionally installed 4 years ago. 3 of the 5 zones (1,3,5) are not being triggered by the timer, Zones 4-5 are working. Panel is getting 38VAC, and non-working zones are getting the same voltage at the same time (even when only one...
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks