Search results

Bummer. Just curious, do you happen to know what the 6pin J10 port is used for?

I have a Clack water softener and Ozone filter and would like to do some remote monitoring of these systems (remaining capacity, regen frequency etc.). They both have Clack WS1 variants so I am wondering if there's a standard way to retrieve data off these valves. I have tried sniffing the three...

Yes seeing as this is a new well without iron bacteria I plan on keeping it that way, so periodically shocking it is part of my plan.

Ha ha yeah on a similar island (I believe that movie was set on Bainbridge). My brother lives on the same island as we do and after his well pump went out around Christmas time last year and he was without water for over a week because he couldn't get anyone to service it, I figured it made...

Currently don't have iron bacteria, it is a new well and I have been pretty diligent in sanitizing it anytime I crack open the well cap. We live on one of the Islands in the Puget Sound so we don't get very cold winters. Anyhow the well house is insulated and I'll probably put a small heater...

Thanks for the links. Super helpful. I should be able to backwash at 10-12 GPM with my current pressure tank capacity and reserve in the well.

Thanks Reach4, I had read that Katalox can produce Katalox "dust" and to put a sediment filter after the Katalox to filter it out. Seems like it might be overkill/unnecessary though. Does the rest of the system look about right?

Hi everyone, I am about to pull the trigger on a whole house filtration and softening system for the property we are developing. We are developing the property in two phases. Phase 1 will be a 1000 ft2 guest cottage with two bathrooms for our 6 person household (2 parents and 4 kids under 6)...