Search results

No check valve. When I get home I will turn breaker on fill and monitor pressure see if it drops out with power back off. Is it possible that a bad diaphragm in a pressure tank would cause this?

It is a 40/60 which is what was originally on it before it was replaced. The line did break ahead of the switch and was replaced. Maybe I have a small leak somewhere that I had missed. Temps reached negative 30. Would I still hear the switch click on though when pressure dropped below 40? I do...

The pressure seems to hang right around 50psi with nothing running. I ran the tub and faucet to drain below the cut on and cannot hear the switch clicking yet it will slowly regain pressure as pump is running

Due to extreme cold I had to replace main water line. While at it I replaced new 40/60 pressure switch and pressure gauge. Pressure switch will not cut in or off and well pump is constantly running. I am unsure if if I wired the switch backwards or not. I have the breaker running to the center...