Search results

I am going to try the WHA and see if there is any benefit. Cheap and easy fix if it works.

Mine does not have a pump.

The pump is if you have low water pressure.

The thump is upon initial valve opening when the flush first goes. Would a WHA not help with that?

I found something that will work: https://www.amazon.com/Anderson-Metals-Fitting-Forged-Street/dp/B006PKKZEU This solves the inline problem with the least amount of fittings. Thanks for your help everyone.

These toilets need a minimum level of water pressure to properly function. I guess having that booster pump would solve the problem if your supply is too low. I never noticed that image before. That's really funny. :)

Thank you for the info. The toilet has a huge thump every time the inlet valve opens which activates the siphon. Its annoyingly loud. For the WHA, i was hoping to get a male to female inline type, which I have yet to find in 1/2" MIP/FIP threads.

I installed a Woodbridge Bidet toilet, and it uses a 1/2" MIP thread to connect to the toilet. Ref here: https://www.woodbridgebath.com/home/product/detail/id/1361 You can see the 1/2" braided hose in the second pic on the left side. While I can certainly sweat in a WHA, I would rather...