Search results

Hi All, To close this thread, I wanted to post that it was NOT the cartridge. The cartridge actually looked pretty good. I still swapped it though, since it was opened up and I had a spare. When I turned the water back on, I had the same effect — a dribble. My prospects were...

Thanks, G !!

Hi, So I am narrowing my suspect list to the 1222 cartridge in the mixing valve. If I am on the wrong track, please let me know. Thanks, David

Hi All, Happy upcoming 4th! I am stumped by a lack of water from the shower in our Mother in Law unit, which is a shower stall that was put in around 15 years ago. The mixing valve is a Moen Adler (one handle). Plumbing to the shower is via 3/4” pex, and copper for the last few...

I’m just wondering now if it is worth it to replace those valves, or if it is almost a waste of time and money… Thanks, David

Hi Reach, I do not hear water moving in the valve at the back of the house after shutting off the front valve. Thanks, David

Hi Jeff, Thanks for the response! I was referring to the idea that I would use pex to directly transition from the copper, but my plumber corrected me on that mistake immediately... Thanks, David

Hi Reach, All, I just returned from the rental house, and I am more confused than ever. Here is what I learned -- some of this info may be completely irrelevant -- that's how confused I became... There are two valves that shut off the water at the house. The one out front, on the pipe from...

Hi Terry, Thanks very much! I agree about using PEX. My plumber said PEX is not approved for exterior use, but I wonder if that extends to transition fittings like Sharkbite (like I said, my copper soldering skills are a work in progress)? I will definitely rough in the hot...

After getting a bit of much needed sleep, I may have gained some clarity… when I was checking to see if everything was shut off, I did turn off the supply to the water heater. I am also pretty sure that the water heater was not running for any of the time I was searching for the leak. This is...

Hi Fitter, Jeff, Fitter, I will definitely check out the line covers — thanks! And Jeff, to answer your questions, this is a early 1950s house with original touches like the the tile in the bath and kitchen. We’ll probably hang onto it for some time… I agree that there are...

Hi Terry, Thanks very much for the response — I appreciate it! I should’ve better described the house. The water currently comes into the house near the kitchen (cold water for the kitchen faucet is branched off of that pipe). From there my best guess is that the cold line resembles...

Hi All, This forum has been fantastic, so I am hoping that you all can help me yet again :) We have a rental house that was built in the early 1950s and it has a concrete slab. You probably already know where this is going… When we bought the house, the living room floor had a...

Hi Terry, What brought you to Santa Rosa? Just curious… Thanks, David

Wow, I must be getting old faster than I thought... the place that I read about not using pex to the tub spout was HERE, in THIS thread! Sorry, Jim, credit needs to go to you on that great tip ! Thanks, David

Hi John, It must be a regional thing... the plumbing is all original, and all galvanized. Thanks, David

Hi Jeff, Thanks very much -- you hit several nails on the head! I can access the whole setup via the closet that is behind the shower, so that is a great idea (opening the whole thing. Currently, only a small section has been cut to provide access). The quote of around $1,200 is...

Hi Terry, Thanks a bunch! I had no idea that there was a Santa Rosa connection... :-) Where my family lives (also in Santa Rosa, also in an early 1950s house) we have a walkout basement, so I can see quite a bit of the rough plumbing. Everything I can see is galvanized. If the...

Hi Jim, Thanks very much -- I appreciate it ! I am hoping to tackle this myself, which is why I am hoping that PEX is a good option. My soldering skills are questionable, but my PEX fu is strong :) Great point about the bracing of the valve... I guess that my best bet is to remove...

Hi All, I am needing to replace the 1950's 3 handle (hot, cold, and shower/tub) valve assembly in my mother-in-law's 1950s house, and I am considering a Moen setup that uses PEX. When I have replaced the stem for the shower head, it appears that the small part that I can see in the...