Search results

The washing machine picks up off that branch too so I'll run 3/4 hot to the Master Bath.

Yes the master bath has a large tub and a shower with a moen dual showerhead attached. I am perfectly fine with my current water pressure and volume. I did have to remove the shower head restrictor though. The tub and shower have 1/2 copper down to the crawl space. transitioned into the old...

So 1 in to the softener that to the HW heater. From there 3/4 branched to 1/2 stub outs for fixtures. On the Hot side is Half inch fine as the branch and stub out. I have 2 baths one just a shower but we never really use that one. The kitchen is one line up to the sink then a two way to sink...

I'll be keeping with the branch system. I have 3/4" copper coming into my house. The rest of the pipe is Galvanised what looks to be 1/2" to me. The diameter is roughly 7/8" OD. I want to replace all that. I'm adding a 2 cuft water softener. Should I go 1" PEX A from the 3/4 copper to the...

I went ahead and grabbed it. That is the calculations I had come up with. I was initially thinking I'd go with a 48,000 grain but program it for 36,000 grains. I guess I'll set this up for 40,000 grains and a day override of 28 days. Now I'm trying to find a 12x52 Catalytic Carbon filter to...

I found a deal on an unopened boxed Watts PSWR160 FOR $600. My concern is it might be too big. I was initially shopping for 48,000 grain. The specs say that the minimum this can run is 40,000 grains 6lb salt. We use around 100 gallons a day according to our last water bill. A test strip...