Search results

MN code uses UPC, and table 1002.2 shows 42" for 1.5 pipe, and 60" for 2 inch pipe. I want to be able to run the vents to the back/exterior wall, but I just don't think I have the room. I also can't drill holes through TJI webbing within 12-18" depending on size, so that limits how close I can...

I appreciate your help! So I have a dedicated 2" drain for the tub/shower that connects to the main stack 20' feet away. I just don't have a wall to run a vertical vent within 5' of the trap. I just need to find a way to run a vent to the tub/shower, but my space is limited along with height...

Very rough (bad) drawing! Second photo is current state of project (recessed floor, and replaced rotten subfloor). ABS vent pipe still in the wall if needed... WC is 3", with a vent/lav downstream (this is my problem) 15". Then from the WC to tub, I have 6.5', and from the tub to shower, 5.5'...

DIY'er looking for advice/help! Shower has been leaking into the basement, so it was finally time to demo. Plan is to recess the subfloor, and install curbless shower with glass 90 and a shower door. Tub will be a freestanding unit. This leaves me with my question(s)? What is the proper way to...