Search results

Hey Bannerman thanks for the informative info. Yeah I set the main water line to 60psi and set the ST-5 air pressure to 60 psi off of the water heater (not attached to the water heater). The change I've noticed is that I do not see pressure creeping up as before it was installed when both hot...

Thanks for the informative comment @Bannerman . I just finished the install of an Amtrol ST-5 about a week ago on my 40 gallon water heater tank and do notice that the pressure does not creep up anymore (when the water heater is not on) and is pretty consistent at 55 psi at the main water line...

Well did some more digging around in my basement and see that its copper to pex and all lines are secured pretty well and still cant figure out where the banging is coming from. Tried lowering the water pressure to 30 psi and it seems to be stay around 30-40psi and sometimes it does bang when...

Sorry for the long post but I think all this info could be helpful?? It seems like this may not be a water hammer issue since water hammer is only when you close the valve thats when you hear the water hammer, but in my case I only hear the banging when opening the cold water. Been living at...