Re: Drilling Through Ceramic Bathroom Tile
Posted by Dave R. on March 04, 2004 at 19:47:00:
In response to Re: Drilling Through Ceramic Bathroom Tile
Thanks HJ, I really appreciate all of your help in this project. I also enjoy reading your responses to other postings. You seem to give the most useful advice.

: Most carbide bits will work. The flat pointed ones may be the best for your application.

: : I am preparing to install some wall mounted lavs, partitions, paper towel dispensers and grab rails. The bathroom walls are tiled with 4"x4" ceramic tiles. Can anyone with experience in this type of work recommend a good drill bit for this purpose?

: : Thanks in advance!




Replies to this post
There are none.