Toilet Flange Rough In
Posted by TK on March 23, 19100 at 15:28:40:
I know this topic gets a lot of questions, but I need to clarify something...

I am in the process of finishing my basement bathroom (finished the framing yesterday). The 3" toilet stack is a few inches higher than my plywood subfloor. I am putting down 1"x1" mosaic tile. Do I cut the stack now flush with the plywood, or leave an allowance so it is level with the finished floor?

Also, do you recommend a flange that goes on the inside or outside of the 3" stack (both seem to be readily available)?


Replies to this post