epoxy

While attempting to drill out a new hole in a stud shoe, due to a large knot in the stud interfering with the factory hole placement, I slid off the steel and put a 7/64" hole through the standpipe tail piece, right at the stud. I was working at a poor angle, rushing, and am already extremely...

We have a damaged 3" PVC pipe a few inches from a cross fitting. Everything is dug up, the hole is found, and the tree root is removed, but I was wondering what the possibility of using epoxy putty on the outside of the pipe to fix the problem area. The hole is approximately 3/8" wide by 1.5"...

I recently tunneled under my house to repair a broken PVC sewer line from the toilet. While I was down there I noticed other joints leaking. All the leaking joints are connections between PVC & cast iron. A rubber sleeve is slipped over both and about 4-6 hose clamps are used on each joint...