adapter

I cannot identify this type of thread. BSPP, NPSM, NPSC?? Something else? I count 2 threads more than NPT, and seemingly shallower valleys. Diameter is 1-1/4". I need to adapt to either a 1/2" NPT or a 1/2" sweat.

Can I pour the chloride solution directly down though the casing adapter into the suction pipe ? My casing adapter is pretty rusty, really do not want to take it off. Just wondering if maybe I can add a "T" fitting to the return line as the jet pump is offset from the casing adapter - so that...

If connections can be gendered, and mine is MALE, I would have to say also that mine has a foreskin. Everything I see for connecting a household faucet to a garden hose shows a threaded area that is immediately accessible to the connector, not distanced by a span of smooth metal (as you can see...

I need to extend some 4" PVC drainage pipe. The problem I'm having is that the existing pipe is "Type C" ("tele-duct"). It has a slightly different outer diameter (4.350") than a typical PVC pipe (e.g. Schedule 40, 4.50"). I've only been able to find one possible "Type C to Schedule 40" adapter...

Replacing an outside leaky faucet. Problem is the piping coming off the house is ~7/8inch (I tried both half inch and 1 inch just to try). They do not sell outside faucet in a 7/8inch so I started looking for an adapter but really having no luck on that front. Could someone link an adapter or...

I purchased a portable washing machine. Before installing the hoses to the kitchen faucet, I removed the aerator from the faucet, then I screwed the adapter (that came with the washing machine) onto the faucet. Now I'm returning the washer and am unable to remove the adapter from the faucet...

I purchased an air purifier printed 110V. It has a power adapter of 100-240V. Can I use the air purifier with a power supply of 220-240V? Is the adapter also a converter or transformer? I’m really confused.

Where can I find something that will allow me to attach an attachment meant for a standard sink faucet to a standard shower? I believe I need 1/2 to 15/16 female female. I know the 1/2 is right, but not positive about the 15/16. Does this just not exist? Do I need to use two adapters to achieve...

I have a Culligan Gold Series Water Softener system. My resin tank (9x48) was leaking and I bought a generic replacement. Of course, the resin tank adapter/coupler (which sits between the tank and the control head) has a different thread size (propriety to Culligan) than the generic tank...