elbow

I am considering replacing (with PEX) all of my home’s remaining indoor galvanized water supply lines (at least 40 and up to 95 years old, showing rust at threaded joints but not yet springing leaks) and the existing main valve (see picture). Not at this time planning to replace exterior buried...

Hi there- Im hoping someone can help direct me to the right tool to solve what looks like an easy fix. Apologies I don’t know the right lingo. The main drain pipe on my garbage disposal is too short so there is leak when water goes into the pvc elbow pipe. There is a teeny gap. It only leaks...

I am transitioning a 1-1/2" PVC bathroom sink drain from vertical to horizontal with a 1-1/2" PVC 90 degree long sweep. Then the next elbow I could use another 90 degree long sweep OR a 60 degree. Which option would be better? Please see photos... Thank you

Hello. I am planning out the DWV for a tiny house on wheels. As a result, I don't have a crawlspace or a below grade in the slab space to work with. To keep the DWV from freezing I'm routing the horizontal runs just under the subfloor. I plan on cutting and sloping a channel in the rigid foam...

This is my first adventure into plumbing and I need some guidance. This is in a 1940's home where a previous owner used one of those wonderful Form N Fit extensions to get the bathroom sink drain lined up with the P-trap that is angled slightly to the left in the photo, while the drain is off to...

Hello all, I am needing some advice. First let say I am very familiar with plumbing. Grew up doing it with my dad. However, I fortunately do no have to make many repairs, but today is the first of this kind for me. My fiance came outside her house and water was bubbling up out of the ground...