stuck

fixing up an old house and the bathtub looks great other than this drain. I’m very confused at what I’m looking at as I’ve never dealt with tub drains. Ideally I want to fix it up and add hardware. Is this a shoe that’s been sealed over or is this apart of the tub and I should reseal it? The...

So our well stopped pumping Wednesday night, 9/20. Went and flipped the breaker off then back on. Lights dimmed then came back 5-10 seconds later. I just figured the pump was locked up, even though the well and pump are only 6.5 years old. Bought a new pump and started the project Saturday...

I've got a Kinetico Model 60 (unknown age, serial 01198097 if that gives any indication). City water main broke in front of our home, and shortly after the system would get stuck in the regeneration cycle. Initial thought was a sediment influx, though there is a pre-filter. Disassembled and...

I'm trying to shut off the water to my kitchen faucet so that I can swap out a new cartridge. However, I'm not able to completely shut off the water under the sink. I realize that I can shut off the water to the house to perform this task, however, I would prefer to be able to shut it off...

My wife took a shower in the bathroom right next to our tankless, and the handle is broken or something, she was screaming because of scalding water. So I run and turn down the tankless temp from 118 to 100. Afterwards I want to turn it back, but it sticks at 110. I figured some safety feature...

Hi, I'm not even sure what to title this. I've got an old Moen shower head (moved in 2001) that leaks. I'm sure it is the cartridge. When I take apart the handle (single handle unit), i get to a few parts that prevent me from getting to the cartridge. Please see the attached pictures. How do I...

I have a leaky shower valve. I’ve fixed a few leaky faucets before, so I thought this would be no different, but I cannot even get the escutcheon off to figure out what kind of valve I have. Both screws on the escutcheon have issues. I was able to back one screw out enough to spray PB Blaster...

I have 48000 grain Fleck 5600 SXT water softener about one year old. I see that after the BD cycle the float valve is stuck in up position. I also did not see water being drawn into softener during BD cycle since the water level in Brine tank never went down. During the BF cycle there is no...

I am attempting to replace an old Kohler, single handle shower pressure cartridge and mixing cap. You can see the parts here: https://www.amazon.com/gp/product/B001GZU9FY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Unfortunately, when I took the cap off... and exposed the pressure regulating...

Long time lurker, first time poster. What a mess, I'm not sure where to start. We are expecting our 2nd child and will have to pay out of pocket for the birth because of insurance BS. So I was trying to save some money by replacing the well pump myself. I'm very handy and didn't think it...

My well has been in over 15 years, it is a 2 inch cast iron pipe, and it has a 1.25" PVC pipe inside that that goes down to the well point. I noticed when I lifted the PVC to try and take it out, it was stick in a major way. Possibly from mineral deposits built-up on it over all those years...

Hello All, I have 3 Grohe Eurocube single lever faucets (model 23129000) in my bathrooms which are all leaking. Grohe was kind enough to send me the replacement cartridges free of charge so I attempted to take off one of the faucet handles by first removing the set screw on the back of the...