Removing single handle shower faucet
- Thread starter DDE
- Start date
Peanut9199
Customer Service Manager Plumbing Wholesale
All depends on what show handle you have but most of the time it takes a good pull, you normally have a billed up of lime.
Sponsor
Paid Advertisement
GrumpyPlumber
Licensed Grump
Oh, wait....lets be clear on terminology...
The "handle" is the chrome or brushed nickle finish handle...the "stem/ cartridge" is the actual working part of the valve the handle is attached to.
If your only taking the "handle" off and it's a moen...DON'T pull that clip!
The "handle" is the chrome or brushed nickle finish handle...the "stem/ cartridge" is the actual working part of the valve the handle is attached to.
If your only taking the "handle" off and it's a moen...DON'T pull that clip!
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
Moen
Unless you remove the handle and stop tube, you can't even get to the clip. If it is a Delta lever handle shower valve, then the handle can corrode to the round stem on the ball. If so, you have to rotate it while pulling on it.
Unless you remove the handle and stop tube, you can't even get to the clip. If it is a Delta lever handle shower valve, then the handle can corrode to the round stem on the ball. If so, you have to rotate it while pulling on it.
