Toto Ultramax question...

HDFAN1

HDFAN1

New Member
Messages
34
Reaction score
0
Points
0
Upon closer inspection of my new Ultramax, there is, for lack of a better word, a seam running horizontally around the exterior of the tank, approx. three inches above the bowl. It is visible, as well as being able to feel it .

It's as if the tank were actually cast in two pieces, and then joined together at this point.

Terry, or someone who has seen a lot of these one piece toilets, is this normal, or is my luck (bad) holding true and I got that one in a million defect that slipped through?

Thanks
 
toto_cst854_inside_tank.jpg

Inside a one-piece Toto toilet.
It's how they join them. A toilet comes from several pieces, and what you are seeing is one of the seams.
 
Last edited:
If it were American Standard, it would be a defect. I get most of my defects with American Standard and Kohler.
What he is talking about is pretty normal. I have the least amount of problems with Toto.
It's a seam where the two parts are joined, Period.

Dumpy,
Have you even seen a Toto?
 
Last edited:
OK, I have not looked for this on the INSIDE of the tank. What I am talking about is visible/touchable from the OUTSIDE of the tank.

Is this normal?
 
Thanks Terry, I appreciate the quick reply!

I can't wait to get this thing installed. Tile guy is coming 21st, so by the end of that week it will be a done deal.:)
 
You must log in or register to reply here.

Similar threads

Rockstead
Toto Washlet C5 on an older Ultramax II without cord hole and other questions
Replies
9
Views
8K
Tuttles Revenge
Tuttles Revenge
Howard M Emerson
Toto On A Double Sanitary T Experience
Replies
2
Views
2K
Howard M Emerson
Howard M Emerson
A
Help me Correct a (Plumbing) Wrong...
Replies
7
Views
7K
Paulypfunk
Paulypfunk
JDeej
Champion 4 Flush Valve- Toto Toilet Questions
Replies
4
Views
7K
Terry
Terry
Ted T
Noisy Toto Ultramax
Replies
8
Views
5K
Ted T
Ted T
Back
Top