what is a vacuum relief valve for?

northman

Member

Messages

35

Reaction score

0

Points

6

Location

Washington

• May 14, 2007

• #1

on a water heater/expansion tank installation?

Looking at the Watts site to size an expansion tank, they show a vacuum relief valve installed at the water heater. What is the purpose? Is it necessary or are they just trying to sell parts?


Greg

 

Peanut9199

Customer Service Manager Plumbing Wholesale

Messages

869

Reaction score

2

Points

0

Location

Ontario, Canada

• May 14, 2007

• #2

"Vacuum Relief Valves are used in water heater/tank applications to automatically allow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the system and damage water heater/tank equipment." and no you don't need it.

 

Sponsor

Paid Advertisement

• 1 minute ago

• Add bookmark
• ##

 

Jadnashua

Retired Defense Industry Engineer xxx

Messages

32,770

Reaction score

1,195

Points

113

Location

New England

• May 14, 2007

• #3

My city requires them on new installs along with a tempering valve. My guess is to prevent what may be heated water that has sat for awhile in the water heater from being sucked back into the rest of the potable water. Since all of the water is supposed to be potable, not sure why, but as I said, it is code in my city.

 

hj

Master Plumber

Messages

33,613

Reaction score

1,057

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• May 14, 2007

• #4

vacuum vent

If the heater is in an upper floor level or attic, then the negative pressure created by a broken pipe draining the heater could collapse the walls of the heater. In this case, the installation requires a vacuum vent to relieve the negative pressure. It is not required if the heater is in a basement or first floor because those installations cannot create high negative pressures.

 

Dunbar Plumbing

Master Plumber

Messages

2,920

Reaction score

11

Points

0

Location

Northern Kentucky/Greater Cincinnati Area

Website

www.koldbreeze.com

• May 14, 2007

• #5

Required on most commercial applications regarding restaurants, nail shops, beauty salons, where chemicals/cross connections are possible above mild.

 

hj

Master Plumber

Messages

33,613

Reaction score

1,057

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• May 15, 2007

• #6

valve

Those applications do not require a vacuum relief valve, they require backflow prevention devices, and the higher the possible contamination level, the more sophisiticated the device has to be.