toto flush lever
- Thread starter mjrva
- Start date
Plumber2000
Plumber
Either it's the flapper or the chain from flapper to handle has too much slack.
Either take out the slack or replace the flapper.
Lift tank lid to see if you can figure out what it is.
Either take out the slack or replace the flapper.
Lift tank lid to see if you can figure out what it is.
Sponsor
Paid Advertisement
If you have the side mounted lever, the white plastic behind the chrome may have cracked. The outside lever should move the brass rod with little pressure.
It can operate loosely however if that part cracks.
It can operate loosely however if that part cracks.
