New to site. Great info.
I have a high and out of level, unsecured flange over slightly unlevelled finished basement tiled floor. Wow lol
I would prefer not to raise floor because i dont have tile to replace.
And flange is glued and embedded in concrete.
If I cut a piece of 5/8 inch ( plywood in shape of base and cut out hole for flange ( one side would be about level with top of flange and other side would be about 1/8 lower ) and secured to tile via tapcons.
I know toilet would sit higher and I would have to finish lip some how ( last time I used grout )
Question is, will the toilet seal ok if the flange and floor height ( the plywood ) are roughly the same height? Thks
I have a high and out of level, unsecured flange over slightly unlevelled finished basement tiled floor. Wow lol
I would prefer not to raise floor because i dont have tile to replace.
And flange is glued and embedded in concrete.
If I cut a piece of 5/8 inch ( plywood in shape of base and cut out hole for flange ( one side would be about level with top of flange and other side would be about 1/8 lower ) and secured to tile via tapcons.
I know toilet would sit higher and I would have to finish lip some how ( last time I used grout )
Question is, will the toilet seal ok if the flange and floor height ( the plywood ) are roughly the same height? Thks