w kern
New Member
I want to add the two pipe system to my oil burner, bought the by pass plug,1/16 for a A pump,should it have a 1/16 hole ?
By pass plug {suntec pump}
- Thread starter w kern
- Start date
gennady
New Member
- Messages
- 46
- Reaction score
- 0
- Points
- 0
- Location
- Brooklyn, New York, United States
- Website
- www.highefficiencyboilersnyc.com
to convert to 2 pipe system, remove return port plug and install by pass plug, then connect return line, shut off valve on return line must not be installed.
Similar threads
